Corresponding data set for Tran-SET Project No. 17STTSA02. Abstract of the final report is stated below for reference:
"The main objective of this study was to develop a high-resolution model capable of simulating the response of bridge structures to hydrodynamic loads for hurricane design conditions (i.e. surge height, wave height, and frequency) expected in the Texas-Louisiana coast. The model relied on Coupled Eulerian-Lagrangian techniques (CEL) where solids are simulated with Lagrangian meshes, while fluids are simulated using Eulerian meshes, and was calibrated using historical data from wave impact laboratory tests. Two high resolution models were created, the first of a tsunami wave impact test conducted at Oregon State University and the second of a bridge located in the Gulf Coast that was heavily impacted by hurricane Katrina. The tsunami wave impact model showed that the CEL technique could provide accurate estimates of wave elevation, water velocity, and wall reaction recorded during the tests at Oregon State University. The bridge model was used to calculate bridge support demands for a representative combination of storm surge, wave velocity and wave length."
Matamoros, Adolfo and Testik, Firat, "Coastal Bridges under Hurricane Stresses along the Texas and Louisiana Coast" (2018). Data. 25.