Identifier

etd-05252016-125133

Degree

Master of Science (MS)

Department

Renewable Natural Resources

Document Type

Thesis

Abstract

Patterns from hurricane damage give an indication that longleaf pine (Pinus palustris) is more windfirm than loblolly pine (Pinus taeda). Tree windfirmess has been attributed to many factors including species and material properties like wood strength and stiffness. Because longleaf pine wood is stronger and stiffer than loblolly pine wood, this study used static winching methodology to see if these properties account for differences in windfirmness by measuring bending force required to break stems (MMAX). Stress-strain diagrams were constructed for pulled trees to explore how they behave under increasing loads. Based on these diagrams, it appears that living trees can act as linear elastic materials as they experience increasing static lateral stress. As expected, longleaf pine stems were stiffer than loblolly pine wood in situ based on Young’s modulus of elasticity derived from these diagrams. Tree basal area was the best predictor of MMAX for both species, however, species had no effect on the maximum bending moment required to break tree stems of a given basal area for these trees under these conditions. The stiffness of the stems was higher for longleaf than loblolly as indicated by the modulus of elasticity, but the strength of the stems as indicated by the modulus of rupture was not significantly different between the species.

Date

2016

Document Availability at the Time of Submission

Release the entire work immediately for access worldwide.

Committee Chair

Dean, Thomas

DOI

10.31390/gradschool_theses.3008

Share

COinS