Title

High-pressure molding and carbonation of cementitious materials

Document Type

Article

Publication Date

1-1-1999

Abstract

Bulk carbonation of cements can have several beneficial effects, including permeability and porosity reduction, increased compressive strength, and pH reduction. Using supercritical and near-critical CO , we examined both in-situ molding processes and postsetting treatments of cement mixtures, including those with fly ash, cement slag, and reactive silica. Specimens were characterized by X-ray diffraction analysis, scanning electron microscopy, and thermogravimetric analysis (for carbonate content), pH by a contact method, and porosity measurements such as N adsorption and water absorption. Surface carbonation was almost instantaneous for cured cements using supercritical CO , and rapid bulk carbonation of forms several millimeters thick could be effected using in-situ molding. Carbonation by supercritical CO formed a dense layer of interlocking CaCO crystals in minutes. The best way to rapidly carbonate large cement forms was to harden them in a mold under CO pressure; these materials cured at an accelerated rate, were densified, and showed enhanced formation of crystalline calcite. In some cases this was accomplished without significant loss of microporosity. The presence of different types of reinforcing fibers did not impede carbonation by this method. © 1999 American Chemical Society. 2 2 2 2 3 2

Publication Source (Journal or Book title)

Industrial and Engineering Chemistry Research

First Page

2641

Last Page

2649

This document is currently not available here.

COinS