Title

Laboratory Evaluation of Environmental Performance of Photocatalytic Titanium Dioxide Warm-Mix Asphalt Pavements

Document Type

Article

Publication Date

5-10-2012

Abstract

The use of titanium dioxide (TiO 2) coating for pavements has received considerable attention in recent years to improve air quality near large metropolitan areas. However, the proper method of applying TiO2 to asphalt pavements is still unclear. This study evaluated the benefits of incorporating TiO 2 in the preparation of warm-mix asphalt (WMA). Two application methods to integrate TiO 2 were evaluated, a water-based TiO 2 solution applied as a thin coating and using TiO 2 as a modifier to asphalt binder in the preparation of WMA. On the basis of the results of the experimental program, it was determined that the photocatalytic compound was not effective in degrading NO x in the air stream when used as a modifier to the binder in the preparation of WMA. This could be attributed to the fact that only a small amount of TiO 2 is present at the surface. When used as part of a surface spray coating, TiO 2 was effective in removing nitrogen oxide (NO x-) pollutants from the air stream with an efficiency ranging from 31 to 55%. The maximum NO x removal efficiency was achieved at a coverage rate of 0.05 L/m 2. However, durability of the surface spray coating requires further evaluation. In addition, the increase in flow rate and relative humidity negatively impacted the effectiveness of NO x reduction efficiency. In contrast, the increase in ultraviolet (UV) light intensity improved the NO x removal efficiency of the surface coating. © 2012 American Society of Civil Engineers.

Publication Source (Journal or Book title)

Journal of Materials in Civil Engineering

First Page

599

Last Page

605

This document is currently not available here.

COinS