"A Thermoset Shape Memory Polymer-Based Syntactic Foam with Flame Retar" by Rubaiyet Abedin, Xiaming Feng et al.

Faculty Publications

Title

A Thermoset Shape Memory Polymer-Based Syntactic Foam with Flame Retardancy and 3D Printability

Authors

Rubaiyet Abedin, Department of Mechanical Engineering, Southern University and A&M College, Baton Rouge, Louisiana 70813, United States.
Xiaming Feng, Department of Mechanical & Industrial Engineering, Louisiana State University, Baton Rouge, Louisiana 70803, United States.
John Pojman, Department of Mechanical & Industrial Engineering, Louisiana State University, Baton Rouge, Louisiana 70803, United States.
Samuel Ibekwe, Department of Mechanical Engineering, Southern University and A&M College, Baton Rouge, Louisiana 70813, United States.
Patrick Mensah, Department of Mechanical Engineering, Southern University and A&M College, Baton Rouge, Louisiana 70813, United States.
Isiah Warner, Department of Chemistry, Louisiana State University, Baton Rouge, Louisiana 70803, United States.
Guoqiang Li, Department of Mechanical Engineering, Southern University and A&M College, Baton Rouge, Louisiana 70813, United States.

Document Type

Article

Publication Date

2-11-2022

Abstract

Here we report a thermoset shape memory polymer-based syntactic foam inherently integrated with flame retardancy, good mechanical properties, excellent shape memory effect, and 3D printability. The syntactic foam is fabricated by incorporating a high-temperature shape memory polymer (HTSMP) as the matrix, with 40 vol % hollow glass microspheres (HGM) K20, K15, and K1 as fillers. Compressive behavior, strain-controlled programming followed by free recovery, stress recovery, and flame retardancy of these three syntactic foams were studied. Dynamic mechanical analysis and thermal characterization validate their high glass transition temperature ( = ∼250 °C) and excellent thermal stability. Our results suggest that the foam consisting of K20 HGM exhibits high compressive strength (81.8 MPa), high recovery stress (6.8 MPa), and excellent flame retardancy. Furthermore, this syntactic foam was used for three-dimensional (3D) printing by an extruder developed in our lab. Honeycomb, sinusoidal shapes, and free-standing helical spring were printed for demonstration. This high-temperature photopolymer-based syntactic foam integrated with high , flame retardancy, high recovery stress, and 3D printability can be beneficial in different sectors such as aerospace, construction, oil and gas, automotive, and electronic industries.

Publication Source (Journal or Book title)

ACS applied polymer materials

First Page

1183

Last Page

1195

Recommended Citation

Abedin, R., Feng, X., Pojman, J., Ibekwe, S., Mensah, P., Warner, I., & Li, G. (2022). A Thermoset Shape Memory Polymer-Based Syntactic Foam with Flame Retardancy and 3D Printability. ACS applied polymer materials, 4 (2), 1183-1195. https://doi.org/10.1021/acsapm.1c01596

This document is currently not available here.

COinS