Semester of Graduation

May 2022

Degree

Master of Construction Management (MCM)

Department

Construction Management

Document Type

Thesis

Abstract

One of the emerging solutions to enhance the durability of asphalt pavements is the use of a French asphalt mix known as “High-Modulus Asphalt Concrete (HMAC).” This mix uses a hard asphalt binder, high binder content (about 6%), and low air voids content as compared to Superpave mixtures. The key objective of this study was to develop a cost-effective HMAC mixture using crumb rubber and local materials in Louisiana. To achieve this objective, four HMAC mixtures were prepared using two asphalt binders (PG 82-22 and PG 76-22 plus 10% crumb rubber) and two Reclaimed Asphalt Pavement (RAP) contents (20% and 40%); additionally, a conventional Superpave mixture in Louisiana was prepared as a control mixture. The laboratory performance of these five mixtures was evaluated in terms of workability, dynamic modulus, rutting resistance, and cracking resistance. The AASHTOWare Pavement ME Design software was also used to estimate the long-term field performance of these mixtures. Results indicated that the HMAC mixture prepared with 10% crumb rubber and 20% RAP successfully met the French mix design specifications for HMAC and LaDOTD specifications. This HMAC mix outperformed the control Superpave mix in terms of dynamic modulus, rutting resistance, and cracking resistance. Additionally, this HMAC mixture can reduce the required asphalt thickness by 1.5 or 2 inches based on the traffic level. The cost-effectiveness analysis indicated that this HMAC mixture was more cost-effective than conventional Superpave mixtures in Louisiana. In addition, this mixture is environmentally-friendly since it can reduce the disposal of scrap tires in landfills.

Committee Chair

Hassan, Marwa

DOI

10.31390/gradschool_theses.5490

Share

COinS