Identifier

etd-06082004-131956

Degree

Master of Science in Mechanical Engineering (MSME)

Department

Mechanical Engineering

Document Type

Thesis

Abstract

A journal bearing is used to support radial loads under high speed operating conditions. In a journal bearing, pressure or hydrodynamic lift is generated in the thin lubricant oil film that separates the shaft and the bushing, thus preventing metal-to-metal contact. Some journal-bearing configurations are susceptible to large-amplitude, lateral vibrations due to a “self-excited instability” known as oil whirl. In order to investigate the effects of lubricant viscosity on oil whirl, a simplified Thermohydrodynamic analysis (THD) analysis of a plain cylindrical journal bearing system has been developed. The “classical” form of the Reynolds equation coupled with simplified, first-order energy equations are solved in an approximate fashion by assuming a parabolic pressure distribution in axial direction. THD design charts for the rapid evaluation of dynamic coefficients and the threshold speed are developed to investigate the effects of temperature on oil whirl instability. A non-linear transient stability analysis is also presented. This investigation reveals that the inlet viscosity has a pronounced influence on the bearing dynamic coefficients of the lubricating oil film. This investigation also reveals that it is possible to stabilize a journal bearing either by heating the oil or by cooling the oil depending upon the operating region.

Date

2004

Document Availability at the Time of Submission

Release the entire work immediately for access worldwide.

Committee Chair

Michael M. Khonsari

DOI

10.31390/gradschool_theses.1518

Share

COinS